Rubber Gasket

Have structured the silicone

by:TaiHai     2020-09-17

change the structure of your goods in the different industries that is quite a trouble one thing, the silica gel products industry there are many products need to change as material and so on structure adjustment, change to change what products need to pay attention to some problems

the silicone product changes in the structure size for silicone products factory to produce goods actually basic without any doubt, but for die and mould method that is in need of some exquisite, so you have to change the structure of the silica gel products need.

1。 First premise is whether the products of steel to withstand milling cutter and the late production of the machine pressure, in reality a lot of products after change the size or structure of formal because of bad mold steel caused by welding the same follow-up do deformation of mould is pressed. The product deformation, size, the phenomenon such as flash butt.

2. Additional you want to confirm whether the product in the mold above expand or contract, this is the main, if you need to put the whole product size bigger then you need to put on the mould mold core larger expansion size can be directly, but you need to change the size smaller then more troublesome, depending on the product structure and change the size, not a new case that direct welding processing, if the product structure is more complex dimension change is larger then could be the new face new processing, and basic no difference from the new mould, it is more complex.

3. Need of mold in the mold for the product after welding, due to oxidation and influenced by environmental pressure welding products may instead for the service life of mold is certain time limit,

4. In good die as long as the basic it is not the same after welding the new processing mould service life is long, so no matter what your product will be more accurate, then the subsequent product will reduce the quality because of it, that you have to carefully consider the structure changes of silicone rubber products belong to the more complex problems, probably because of 0. 1 mm deviation will lead to the mold scrapped, the mold can be changed, but the product quality will have bigger picture!

An increasing dependence on the use of rubber washers rubber washers suppliers has made numerous changes in the rubber washers suppliers industry over the past decades.
Foshan taihai rubber and plastic co., LTD. is working with the best teams, aligned with international standards and practices to focus on R&D and manufacture of products, and are continuously launching new products in the market. Get to know us at TaiHai Rubber Products.
Foshan taihai rubber and plastic co., LTD. will give you a suitable price for purchasing rubber washers.
rubber washers, is an alternative product for rubber washers suppliers to investors and consumers who are passionate about our products or services.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...